Our Specs
Status
A little about what we're building and the journey we're on
Built and developed by leading engineers across semiconductor, submarine, and LED systems
A Few Highlights
Issued U.S. Patent US 12,588,134 B2
We just received our first test result, at low power... and we're pleased! (from Airmid HealthGroup, June 2026)
We’re in the process of additional testing
We’re in planning for pre-manufacture product and engineering calibration
Product Status
V1 prototype
Design and scientific testing
V2 prototype
Improved energy usage and efficiency
Proof of Efficacy achieved!
Technical Validation done! Test Results #1 MS2 via AirMid HealthGroup, June 2026
Production-ready Prototype
Additional Tests and Calibrations Underway
Results available soon
Production Status
Manufacture-ready with typical pre-manufacture product and engineering calibration
Install
Super easy! Drill a 6” opening in existing HVAC ducts. Fasten with provided rivets, attach to existing power. That’s it.
Power Requirements
Any 110-480 VAC, 50/60 hertz
Maintenance
every 3 months
Open the 6” opening
Wipe the LED’s with a static cloth or cleaning wipe
That's Quick
In a matter of minutes your'e done!
LIfespan
Our IP was designed with efficiency in mind! Under typical continuous use estimated at 20,000-30,000+ hours
You’re looking at potentially 2.4+ billion cubic feet of treated air!
Per NICHIA’s degradation specs, because we’re handling the heat so well, we’re seeing a significantly less percentage degradation compared to NICHIA’s foreseen numbers.
Min Install space required
Virtually any size HVAC duct
Chip Usage
Designed to accommodate pretty much any UV LEDs
Product Lines + Performance
Configurable and built to suit any square footage + air velocity + duct sizes. Small to large commercial jobs. Duct size and air velocity (windspeed) are an on-site variable impacting treatment results, however, here’s a ballpark for framing:
ClearFlow 120™
120 UV LEDs. Tested against MS2 in 2,000 CFM wind tunnel, in a 2x2 ft duct at 500 feet per minute air velocity
ClearFlow 240™
240 UV LED
ClearFlow 480™
480 UV LEDs
Each install job will be guided by on-site, site-specific engineering to configure the best-fitting product line, UV LEDs count, and installation layouts.
HOW WELL DO YOU KNOW THE OTHER PRODUCTS?
Ask others how long they run their product before measuring their claimed 99% inactivation, and at what power draw. And did they add PTFE reflective material?
Their response may shock you. If they reply.
Retrofit First
Easily installs in virtually any existing HVAC system. No upgrades, no redesign, no disruption.
Easy Install
One six-inch hole. Using existing power. Any licensed HVAC technician.
Patent Protected
Issued U.S. Patent US 12,588,134 B2
Super Efficient
Our patented passive cooling platform addressed the historic LED thermal limitations.
Built on Nichia
Proudly built on Nichia UV LEDs. World's leading LED manufacturer
Lab Tested
Multi-phase third-party calibration testing underway. Phase one results are in!
UV-Clear™ + our Programmatic Partners
Sustainable + Climate-aligned.
Effective air quality. Energy efficient.
UV-Clear™ inactivates airborne pathogens without mercury, without ozone, and without the energy penalty that filtration and ventilation upgrades introduce. In many configurations it reduces fan load; meaning net energy savings, not added cost. Healthier buildings and lower carbon footprints aren't competing goals. With UV-Clear™, they're the same goal.
Learn More
