Use Cases
Commercial real estate owners
Property Managers
Property Managers
Institutional property investors
HVAC contractors
Integrators
Building Engineers
Mixed-use properties
Facilities Directors
Office buildings
School districts
Government facilities
Retail
Hospitality
The IAQ upgrade your building already supports
No renovation. No redesign. No disruption. UV-Clear™ installs into the infrastructure you already have. And starts working the same day.
Retrofit First
Easily installs in virtually any existing HVAC system. No upgrades, no redesign, no disruption.
Easy Install
One six-inch hole. Using existing power. Any licensed HVAC technician.
Patent Protected
Issued U.S. Patent US 12,588,134 B2
Super Efficient
Our patented passive cooling platform addressed the historic LED thermal limitations.
Built on Nichia
Proudly built on Nichia UV LEDs. World's leading LED manufacturer
Lab Tested
Multi-phase third-party calibration testing underway. Phase one results are in!
The Problem
Most IAQ solutions ask a lot of a building.
Upgraded filtration raises static pressure and forces fans to work harder, adding mechanical load and increasing energy costs. Ventilation increases require ductwork modification and multiply heating and cooling expenses. In-room devices need to be installed, maintained, and managed around occupant schedules. Upper-room UV requires ceiling mounting, specialized power, and careful positioning to avoid exposure risks.
The result: buildings that need IAQ improvement defer it because the options on the table feel as disruptive, or as expensive, as the problem they're meant to solve.
The Solution
UV-Clear™ is designed around the infrastructure that already exists.
One six-inch hole in existing ductwork. Existing low-voltage power. Any licensed HVAC technician. The building stays operational during installation. There is no fan load increase, no ductwork modification, no capex renovation.
The upgrade is complete in hours. The improvement is immediate and invisible. better air, no evidence of construction.
FAST INSTALL. AS IT SHOLD BE.
For building operators managing large portfolios, this is the difference between an IAQ program that rolls out in months and one that stalls indefinitely in facilities planning.
Why It Matters for Your Organization
Commercial real estate and REITs
IAQ improvement across a portfolio without triggering major capex cycles. Deployable at lease renewal, at tenant fit-out, or as a standalone upgrade with minimal coordination. A genuine wellness amenity that doesn't require new infrastructure.
HVAC contractors and integrators
A high-margin add-on that installs in a standard service call. No specialized certification. No proprietary tools. Repeatable across every building in your service base.
Facilities teams with deferred maintenance budgets
The upgrade that doesn't compete with the boiler replacement or the roof. UV-Clear™ installs around the schedule you already have, in the time you can spare.
Hospitality
Guests don't see it. The air is better. That's the point.
Where We Stand
Validated.
But we'd like to push for additional testing
COMPLETE
Preliminary ASHRAE 185.1-2020 calibration
UV-Clear™ was tested against ASHRAE 185.1/2 standards with no PTFE reflective materials added to the duct and no burn-in where the device is running before measurement begins. To our knowledge, we are the first UV-C device tested in this manner which was designed to simulate real-world installations and field deployments across all moving air environments. UV-Clear™s prototype device, under 50% power load, was certified by AirMid to provide a 64% first-pass inactivation of MS2 bacteriophage at 2000 CFM
This is a first data point from a prototype still in calibration, an opening result, not a finished spec. More is on the way.
PHASE 2 TESTING UNDERWAY
ASHRAE 241 Schedule F compliance
H1N1 testing on both high and low power settings is actively in progress, specifically targeting ASHRAE 241 Schedule F procurement compliance. Schedule F is the standard your institutional procurement team will require before approving a germicidal UV specification. We are not claiming 241 compliance today. We are showing you the testing roadmap, where we are on it, and what comes next.
ISSUED
IP position
The core thermal innovation is protected by an issued U.S. utility patent US 12,588,134 B2. The patent covers the passive cooling approach that makes dense UV-C LED arrays viable in fast-moving air. This is the barrier that separates UV-Clear™ from off-the-shelf LED products that burn out under real duct conditions.
WORKING HYPOTHESIS 30–50
Equivalent Air Exchange (eACH)
Based on system geometry, airflow parameters, and first-pass test results, our current scientific and mathematical hypothesis places UV-Clear™'s equivalent clean air delivery contribution in the 30–50 eACH range for standard commercial duct configurations. This is a working projection, not yet a certified figure, it will be validated and refined as Phase 2 testing progresses. We're telling you the hypothesis now because compliance buyers deserve to know the number we're working toward, not just that we're "testing."
MANUFACTURE-READY
The platform design is finalized
The product line - ClearFlow 120, ClearFlow 240, ClearFlow 480, is production-ready across small commercial to large institutional air handler configurations. You are not buying a concept or a prototype pipeline.
You are engaging with a production-ready system that is still accumulating proof points.
HOW WELL DO YOU KNOW THE OTHER PRODUCTS?
Ask others how long they run their product before measuring their claimed 99% inactivation, and at what power draw. And did they add PTFE reflective material?
Their response may shock you. If they reply.
UV-Clear™ proof
Real validation. Issued IP. Independent lab.
UV-Clear™ was tested against ASHRAE 185.1/2 standards with no PTFE reflective materials added to the duct and no burn-in where the device is running before measurement begins. To our knowledge, we are the first UV-C device tested in this manner which was designed to simulate real-world installations and field deployments across all moving air environments. UV-Clear™’s prototype device, under 50% power load, was certified by AirMid to provide a 64% first-pass inactivation of MS2 bacteriophage at 2000 CFM. High-power MS2 and H1N1 validation is ongoing.
OUR PATENT
UV-Clear™ also holds an issued U.S. utility patent, US 12,588,134 B2, covering the passive cooling approach that makes dense UV-C LED arrays viable in moving air. Additional testing is underway, including H1N1 on both high and low power settings for ASHRAE 241 Schedule F procurement compliance.
UV-Clear™ Proof
64% MS2 reduction
Single pass, low power, prototype in calibration
ASHRAE 185.1-2020 methodology
Issued U.S. Patent US 12,588,134 B2
Independent lab
Airmid Healthgroup, Dublin, Ireland
Additional pathogen testing underway
UV-Clear™ Install
One 6" hole. Existing power. Done.
UV-Clear™ installs directly into existing HVAC ductwork through a single six-inch opening, fastened with standard rivets, and connected to the low-voltage power already running the air handler. No structural modifications. No ductwork redesign. No added fan load. Any licensed HVAC technician can complete the installation. No specialized training, no proprietary tools, no downtime.
No structural modifications
No ductwork redesign
No added fan load
No specialized training
No proprietary tools
No downtime
KEEP OPERATING
The building stays operational. The improvement is immediate. The evidence of installation is invisible.
UV-Clear™ Install facts
Single six-inch opening in existing ductwork
Connects to any existing 110-480VAC
Standard rivets. No specialized hardware
Any licensed HVAC technician can install
No downtime, no ductwork redesign, no structural changes
UV-Clear™ Safe by Design
UV-C where it works. Away from where people are.
UV-Clear™ operates entirely inside the ductwork. There is no UV-C exposure pathway to building occupants, not from above, not from in-room devices, not from surface treatments that off-gas or produce byproducts. The germicidal process happens in the duct, on the air, before it reaches the people inside.
zero compromise
No mercury. No ozone. No harmful byproducts. No exposure risk to occupants, staff, students, or patients. UV-Clear™ is germicidal by design, and safe by design. Not a tradeoff between the two.
UV-Clear™ Safety facts
Operates entirely within ductwork. Zero occupant exposure
No UV exposure risk
Safe in occupied buildings during normal operation
Where We Stand
Relevant Standards and Regulations
ASHRAE 185.1-2020
Method of Testing UV-C Lights for Use in Air-Handling Units or Air Ducts to Inactivate Airborne Microorganisms. The methodology used in UV-Clear's completed first-pass independent testing. This is the recognized standard for evaluating in-duct UV-C systems, not a proprietary test protocol.
IN PROGRESS
ASHRAE 241-2023
Control of Infectious Aerosols. The first standard specifically addressing infection risk reduction through clean air delivery. Establishes equivalent clean air delivery rate (eACH) targets by space type. UV-Clear Phase 2 testing is actively targeting Schedule F procurement compliance.
ASHRAE 62.1
Ventilation and Acceptable Indoor Air Quality. The ventilation standard enforced by most jurisdictions. In configurations where UV-Clear™ satisfies clean air delivery requirements, it may reduce required outdoor air ventilation rates, decreasing energy load rather than increasing it.
Joint Commission Environment of Care Standards (EC.02.06.01)
Healthcare organizations must maintain safe physical environments, including air quality in patient care areas. UV-Clear™'s in-duct operation produces no occupant UV exposure, no mercury, and no ozone, and is backed by independent third-party testing following recognized methodology.
CMS Conditions of Participation
Hospitals and skilled nursing facilities must meet federal standards for infection control and environmental safety. UV-Clear™ operates continuously and passively inside ductwork, with no impact on occupant schedules or building operations.
Mercury Global Regulations
Mercury is on its way out. Globally. Through regulatory action. The technology that has run air sanitization for a century is on a hard deadline.
Sustainable + Climate-aligned.
Effective air quality. Energy efficient.
UV-Clear™ inactivates airborne pathogens without mercury, without ozone, and without the energy penalty that filtration and ventilation upgrades introduce. In many configurations it reduces fan load; meaning net energy savings, not added cost. Healthier buildings and lower carbon footprints aren't competing goals. With UV-Clear™, they're the same goal.
Learn More
Why UV-Clear™ Now
Mercury is on a hard deadline.
Mercury is on its way out. Globally. Through regulatory action.
The technology that has run air sanitization for a century is on a hard deadline. The market needs a replacement.
UV-Clear™ is that replacement.
Built for the infrastructure that already exists.
CONTACT UV-Clear™
Ready to see how
UV-Clear™ fits what you're doing?
We'll walk you through exactly where we are in the testing process. And exactly what the data says.